ReferencePlatforms/Imaging/Nokia N900: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Imaging= | =Imaging= | ||
To start the imaging process, turn the phone off and remove the battery | |||
From the N900 Imaging machine, run | From the N900 Imaging machine, run | ||
Revision as of 17:33, 24 September 2010
Imaging
To start the imaging process, turn the phone off and remove the battery
From the N900 Imaging machine, run
cd ~/n900-imaging sudo ./flash.py
and follow the on screen directions
Machine Setup
THIS SECTION IS FOR SETTING UP A NEW IMAGING MACHINE The rest of the document is not applicable for flashing.
To make this go quicker, you can set up your MacBook (or any mac) to be a flashing computer.
Start by setting up the required Mozilla written tools
cd ~ #or wherever you want to work from hg clone http://hg.mozilla.org/build/tools ln -s tools/buildfarm/mobile/n900-imaging
At this point you need to obtain the following files:
- moz-n900-vNN.ubi - mozilla custom firmware
- RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin
- RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin
The easiest way is to run
scp maemo@mobile-image02.build.mozilla.org:n900-imaging/moz-n900-*.ubi . scp maemo@mobile-image02.build.mozilla.org:n900-imaging/RX-51*.bin .
Finally, you need the Mac OS X version of the flasher-3.5 program. Download 'maemo_flasher-3.5_2.5.2.2_i386.dmg' from here(live link doesn't work). Next you will need to obtain.