View source for ReferencePlatforms/mobile-imaging-linux

==Install OS==
I installed Debian 5 stable.  The ethernet driver in debian package does not work for the intel gb card.  I used a usb nic that is compatible out of the box.

I ran through the default options, setting timezone as appropriate.  I selected Guided Partitioning -> Use Entire Disk -> All File in One Partition.  When asked which software I wished to install, I selected only 'Standard system utilites'

The following assumes a user account called 'maemo'

At present, we think this computer can only be used for flashing N810s.  We may or may not have to create a Fedora 12 version of this


==Setup OS==
 su -
 apt-get update
 apt-get upgrade
 apt-get install sudo build-essential python2.5 python2.5-dev linux-headers-`uname -r` openssh-server parted openssl git-core uuid-dev
 apt-get build-dep mtd-utils
 
 visudo
 #add the line
 %sudo ALL=(ALL) NOPASSWD: ALL
 gpasswd -a maemo sudo

To get the built in ethernet to work, I downloaded the newest e1000e driver
 wget http://downloadmirror.intel.com/15817/eng/e1000e-1.1.19.tar.gz
 tar zxf e1000e-1.1.19.tar.gz
 cd e1000e-1.1.19/src
 make
 su -c 'make install'
 reboot

The version of mercurial in debian 5 is ancient.  We need to install it from source
 wget http://mercurial.selenic.com/release/mercurial-1.5.2.tar.gz
 tar zxf mercurial-1.5.2.tar.gz
 cd mercurial-1.5.2
 python setup.py build
 sudo python setup.py install

I would prefer the onboard chip to be eth0 and forget the usb ethernet adapter.  I opened /etc/udev/rules.d/70-persistent-net.rules and deleted the line for the USB device and changed the PCI device to be NAME="eth1"

Configure the network card ([http://www.debian-administration.org/article/An_introduction_to_Debian_networking_setup reference]).  I used
 cat >> /etc/network/interfaces << E
 auto lo
 iface lo inet loopback
 
 auto eth0
 iface eth0 inet dhcp

Disable console logging:

* create /etc/init.d/disable-console-errors.sh

 #! /bin/sh
 
 ### BEGIN INIT INFO
 # Provides:          sudo
 # Required-Start:    $local_fs $remote_fs
 # Required-Stop:
 # Default-Start:     S 
 # Default-Stop:
 ### END INIT INFO
 
 case "$1" in
   start)
         echo '2^V^I2^V^I1^V^I2' > /proc/sys/kernel/printk
         ;;
   stop|reload|restart|force-reload)
         ;;
   *)
         echo "Usage: $N {start|stop|restart|force-reload}" >&2
         exit 1
         ;;
 esac
 
 exit 0

* ^V^I is a tab

 chmod a+x /etc/init.d/disable-console-errors.sh
 update-rc.d disable-console-errors.sh defaults 99
 /etc/init.d/disable-console-errors.sh start

==Setup Mozilla Environment==
 hg clone http://hg.mozilla.org/build/tools
 ln -s tools/buildfarm/mobile/n810-imaging
 ln -s tools/buildfarm/mobile/n900-imaging
 cd n810-imaging
 mkdir empty
 echo 'USE AN SD CARD' > empty/INFO
 mkfs.jffs2 -r empty -o empty.jffs2 -e 128
 rm -rf empty
 wget http://samba.anu.edu.au/ftp/rsync/src/rsync-2.6.9.tar.gz
 tar zxf rsync-2.6.9.tar.gz
 cd rsync-2.6.9
 ./configure --disable-debug --prefix=/home/maemo
 make -j4
 make install
 sudo cp ~/bin/rsync /usr/bin/rsync2
 #obtain appropriate nokia flasher and RX-44 stock image
 #you only need one of the flasher* programs, the one for your system.
 #the static one is useful if you have libraries missing
 openssl sha1 RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM.bin flasher-3.0* flasher-2.0.macosx
 #SHA1(RX-44_DIABLO_5.2008.43-7_PR_COMBINED_MR0_ARM.bin)= 5464ae20a17afdbd59633f3d36a2e63281fcd106
 #SHA1(flasher-3.0)= e4e3b0b791dca7bc91c710fc3702f4d72f904e7a
 #SHA1(flasher-3.0-static)= d28b5597649a3ae40579d50f651c5d73afee19f9
 #SHA1(flasher-3.0.amd64)= c56f71b69acd8ed0c19757451e14ba4a59645c5f
 #SHA1(flasher-2.0.macosx)= 484bb141dad18ea68f7618c4f07f549311caf9b5

'''IMPORTANT'''
Newer kernels do not work properly when flashing the N810 firmware (flasher-3.0*).  It is very important that you do not upgrade the kernel on the imaging machine.

If the machine complains about
 request_module: runaway loop modprobe binfmt-464c
Then there is a Maemo SD card inserted into the computer.  Remove all sd cards and readers and reboot

==Setup mtd utils==
 git clone git://git.infradead.org/mtd-utils.git
 cd mtd-utils/ubi-tools
 make
 cp ubinize ~/n900-imaging
 cd ../mkfs.ubifs
 make
 cp mkfs.ubifs ~/n900-imaging
 
 


==Set up Fremantle only Scratchbox==
Download the scratchbox and sdk setup scripts:
 http://repository.maemo.org/stable/5.0/maemo-scratchbox-install_5.0.sh
 http://repository.maemo.org/stable/5.0/maemo-sdk-install_5.0.sh
Then run:
 su - # become root
 mkdir /scratchbox
 SBDIR=/scratchbox
 echo 0 | sudo tee /proc/sys/vm/vdso_enabled #MUST BE RUN on each boot or
                 # be made permanent by echoing 'vm.vdso_enabled = 0'
                 # to /etc/sysctl.conf and running sysctl -p as root
 echo 0 | sudo tee /selinux/enforce
 sh /home/maemo/scratchbox/maemo-scratchbox-install_5.0.sh -s $SBDIR -u maemo
 sudo gpasswd -a $USER sbox
 maemo-sdk-install_5.0.sh -s $SBDIR
 #Accept License
 #Select Option 4, Runtime+Dev+Dbg
 #Select Continue
 $SBDIR/login
 sb-conf select FREMANTLE_ARMEL
 exit
 sudo ${SBDIR}/sbin/sbox_ctl start
 #SB can be launched by 
 ${SBDIR}/login
Install required  packages
 fakeroot apt-get install python python-dev autoconf2.13 libidl-dev libpcre3-dev




=fedora 12 image creator for n900s=
Install fedora 12 then run:
 su -c 'yum groupinstall "Development Tools"'
 su -c 'yum install uuid-devel lzo-devel mercurial'
 hg clone http://hg.mozilla.org/build/tools
 ln -s tools/buildfarm/mobile/n900-imaging
 git clone git://git.infradead.org/mtd-utils.git
 su -
 cd /home/jhford/
 cd mtd-utils/ubi-tools
 make
 cp ubinize ~/n900-imaging
 cd ../mkfs.ubifs
 make
 cp mkfs.ubifs ~/n900-imaging