MediaStreamAPI: Difference between revisions

From MozillaWiki
Jump to navigation Jump to search
(Created page with "= Streams, RTC, audio API and media controllers = == Scenarios == These are higher-level than use-cases. 1) Play video with processing effect applied to the audio track 2) Pla...")
 
No edit summary
 
(68 intermediate revisions by 4 users not shown)
Line 1: Line 1:
= Streams, RTC, audio API and media controllers =
Moved!


== Scenarios ==
The latest version of the draft is now at [https://dvcs.w3.org/hg/audio/raw-file/tip/streams/StreamProcessing.html].
 
These are higher-level than use-cases.
 
1) Play video with processing effect applied to the audio track
2) Play video with processing effects mixing in out-of-band audio tracks (in sync)
3) Capture microphone input and stream it out to a peer with a processing effect applied to the audio
4) Capture microphone input and visualize it as it is being streamed out to a peer and recorded
5) Capture microphone input, visualize it, mix in another audio track and stream the result to a peer and record
6) Receive audio streams from peers, mix them with spatialization effects, and play
7) Seamlessly chain from the end of one input stream to another
8) Seamlessly switch from one input stream to another, e.g. to implement adaptive streaming
9) Synthesize samples from JS data
10) Trigger a sound sample to be played through the effects graph ASAP but without causing any blocking
 
== Streams ==
 
Need to clarify exactly what the semantics of a stream are:
* A window of timecoded video and audio data.
* The timecodes are in the stream's own internal timeline. The internal timeline can have any base offset
but always advances at the same rate as real time, if it's advancing at all.
* Not seekable, resettable etc. The window moves forward automatically in real time (or close to it).
* A stream can be "blocked". While it's blocked, its timeline and data window does not advance.
Blocked state should be reflected in a new readyState value "BLOCKED". We should have a
callback when the stream blocks and unblocks, too.
* Streams can end. The end state is reflected in the Stream readyState. A stream can
never resume after it has ended.
 
Hard case:
* Mix http://slow with http://fast, and mix http://fast with http://fast2; does the http://fast stream
have to provide data at two different offsets?
* Solution: if a (non-live) stream feeds into a blocking mixer, then it itself gets blocked. This
has the same effect as the entire graph of (non-live) connected streams blocking as a unit.
 
== <mediaresource> element ==
 
interface HTMLMediaResourceElement {
  attribute DOMString src;
  attribute DOMString preload;
 
  // If set, the resource repeats indefinitely.
  attribute boolean loop;
 
  // Start stream at this offset in the resource (after looping, if enabled).
  attribute double currentTime;
 
  // End the stream at this offset in the resource (after looping, if enabled).
  attribute double endTime;
 
  // Add this much silence to the start of the stream.
  attribute double delay;
 
  attribute double playbackRate;
  void load();
 
  readonly attribute DOMString currentSrc;
  readonly attribute unsigned short networkState;
  readonly attribute TimeRanges buffered;
  DOMString canPlayType(in DOMString type);
  readonly attribute MediaError error;
  readonly attribute boolean seeking;
  readonly attribute double duration;
 
  // Returns a new stream of the resource played back starting at currentTime using current
  // element state (stream contents do not change in response to future changes in the element)
  Stream startStream();
};
 
<mediaresource> elements can have <source> children.
 
Is this needed? Maybe to allow reliable synchronization/easy use of canned samples.
 
I'm not really sure how much API this element needs.
 
== Media elements ==
 
interface HTMLMediaElement {
  // Returns new stream of "what the element is playing" ---
  // whatever the element is currently playing, after its
  // volume and playbackrate are taken into account.
  // While the element is not playing (e.g. because it's paused
  // or buffering), the stream is blocked. This stream never
  // ends; if the element ends playback, the stream just blocks
  // and can resume if the element starts playing again.
  // When something else causes this stream to be blocked,
  // we block the output of the media element.
  Stream getStream();
  // When set, do not produce direct audio output. Audio output
  // is still produced when getStream() is called.
  attribute boolean streamaudio;
 
  // Can be set to a Stream. Blocked streams play silence and show the last video frame.
  attribute any src;
};
 
== Stream extensions ==
 
Streams can have attributes that transform their output:
 
interface Stream {
    attribute double volume;
    // When set, destinations treat the stream as not blocking. While the stream is
    // blocked, its data are replaced with silence.
    attribute boolean live;
 
    // Time on its own timeline
    readonly double currentTime;
 
    // Create a new StreamProcessor with this Stream as the input.
    StreamProcessor createProcessor();
    // Create a new StreamProcessor with this Stream as the input,
    // initializing worker.
    StreamProcessor createProcessor(Worker worker);
  };
 
== Stream mixing and processing ==
 
[Constructor]
interface StreamProcessor : Stream {
  readonly attribute Stream[] inputs;
  void addStream(Stream input);
  void setInputParams(Stream input, any params);
  void removeStream(Stream input);
  // Causes this stream to enter the ended state.
  // No more worker callbacks will be issued.
  void end(double delay);
  attribute Worker worker;
};
 
This object combines multiple streams with synchronization to create a new stream.
While any input stream is blocked and not live, the StreamProcessor is blocked.
While the StreamProcessor is blocked, all its input streams are forced to be blocked.
(Note that this can cause other StreamProcessors using the same input stream(s) to block,
etc.)
 
The offset from the timeline of an input to the timeline of the StreamProcessor is set
automatically when the stream is added to the StreamProcessor.
 
While 'worker' is null, the output is produced simply by adding the streams
together. Video frames are composited with the last-added stream on top, everything
letterboxed to the size of the last-added stream that has video.
While there is no input stream, the StreamProcessor produces silence and no video.
 
While 'worker' is non-null, the results of mixing (or the default silence) are fed into
the worker by dispatching onstream callbacks. Each onstream callback takes a StreamEvent as
a parameter. A StreamEvent provides audio sample buffers and a list of video frames for each
input stream; the event callback can write audio output buffers and a list of output video
frames. If the callback does not output audio, default audio output is automatically
generated as above; ditto for video. Each StreamEvent contains the inputParams for each
input stream contributing to the StreamEvent.
 
An ended stream is treated as producing silence and no video. (Alternative:
automatically remove the stream as an input. But this might confuse scripts.)
 
// XXX need to figure out the actual StreamEvent API: channel formats, etc.
 
 
== Graph cycles ==
 
If a cycle is formed in the graph, the streams involved block until the cycle is removed.
 
== Dynamic graph changes ==
 
Dynamic graph changes performed by a script take effect atomically after the script
has run to completion. Effectively we post a task to the HTML event loop that makes all
the pending changes. The exact timing is up to the implementation but the implementation should
try to minimize the latency of changes.
 
== Examples ==
 
1) Play video with processing effect applied to the audio track
<video src="foo.webm" id="v" controls streamaudio></video>
<audio id="out" autoplay></audio>
<script>
  document.getElementById("out").src =
    document.getElementById("v").getStream().createProcessor(new Worker("effect.js"));
</script>
 
2) Play video with processing effects mixing in out-of-band audio tracks (in sync)
<video src="foo.webm" id="v" streamaudio></video>
<audio src="back.webm" id="back"></audio>
<audio id="out" autoplay></audio>
<script>
  var mixer = document.getElementById("v").getStream().createProcessor(new Worker("audio-ducking.js"));
  mixer.addStream(document.getElementById("back").getStream());
  document.getElementById("out").src = mixer;
  function startPlaying() {
    document.getElementById("v").play();
    document.getElementById("back").play();
  }
  // We probably need additional API to more conveniently tie together
  // the controls for multiple media elements.
</script>
 
3) Capture microphone input and stream it out to a peer with a processing effect applied to the audio
<script>
  navigator.getUserMedia('audio', gotAudio);
  function gotAudio(stream) {
    peerConnection.addStream(stream.createProcessor(new Worker("effect.js")));
  }
</script>
 
4) Capture microphone input and visualize it as it is being streamed out to a peer and recorded
<canvas id="c"></canvas>
<script>
  navigator.getUserMedia('audio', gotAudio);
  var streamRecorder;
  function gotAudio(stream) {
    var worker = new Worker("visualizer.js");
    var processed = stream.createProcessor(worker);
    worker.onmessage = function(event) {
      drawSpectrumToCanvas(event.data, document.getElementById("c"));
    }
    streamRecorder = processed.record();
    peerConnection.addStream(processed);
  }
</script>
 
5) Capture microphone input, visualize it, mix in another audio track and stream the result to a peer and record
<canvas id="c"></canvas>
<mediaresource src="back.webm" id="back"></mediaresource>
<script>
  navigator.getUserMedia('audio', gotAudio);
  var streamRecorder;
  function gotAudio(stream) {
    var worker = new Worker("visualizer.js");
    var processed = stream.createProcessor(worker);
    worker.onmessage = function(event) {
      drawSpectrumToCanvas(event.data, document.getElementById("c"));
    }
    var mixer = processed.createProcessor();
    mixer.addStream(document.getElementById("back").startStream());
    streamRecorder = mixer.record();
    peerConnection.addStream(mixer);
  }
</script>
 
6) Receive audio streams from peers, mix them with spatialization effects, and play
<audio id="out" autoplay></audio>
<script>
  var worker = new Worker("spatializer.js");
  var spatialized = stream.createProcessor(worker);
  peerConnection.onaddstream = function (event) {
    spatialized.addStream(event.stream);
    spatialized.setInputParams(event.stream, {x:..., y:..., z:...});
  };
  document.getElementById("out").src = spatialized; 
</script>
 
7) Seamlessly chain from the end of one input stream to another
<mediaresource src="in1.webm" id="in1" preload></mediaresource>
<mediaresource src="in2.webm" id="in2"></mediaresource>
<audio id="out" autoplay></audio>
<script>
  var in1 = document.getElementById("in1");
  in1.onloadeddata = function() {
    var mixer = in1.startStream().createProcessor();
    var in2 = document.getElementById("in2");
    in2.delay = in1.duration;
    mixer.addStream(in2.startStream());
    document.getElementById("out").src = mixer;
  }
</script>
 
8) Seamlessly switch from one input stream to another, e.g. to implement adaptive streaming
<mediaresource src="in1.webm" id="in1" preload></mediaresource>
<mediaresource src="in2.webm" id="in2"></mediaresource>
<audio id="out" autoplay></audio>
<script>
  var stream1 = document.getElementById("in1").startStream();
  var mixer = stream1.createProcessor();
  document.getElementById("out").src = mixer;
  function switchStreams() {
    var in2 = document.getElementById("in2");
    in2.currentTime = stream1.currentTime;
    var stream2 = in2.startStream();
    stream2.volume = 0;
    stream2.live = true; // don't block while this stream is playing
    mixer.addStream(stream2);
    stream2.onplaying = function() {
      if (mixer.inputs[0] == stream1) {
        stream2.volume = 1.0;
        stream2.live = false; // allow output to block while this stream is playing
        mixer.removeStream(stream1);
      }
    }
  }
</script>
 
9) Synthesize samples from JS data
<audio id="out" autoplay></audio>
<script>
  document.getElementById("out").src =
    new StreamProcessor(new Worker("synthesizer.js"));
</script>
 
10) Trigger a sound sample to be played through the effects graph ASAP but without causing any blocking
<script>
  var effectsMixer = ...;
  function playSound(src) {
    var audio = new Audio(src);
    audio.oncanplaythrough = new function() {
      var stream = audio.getStream();
      stream.live = true;
      stream.onended = function() { effectsMixer.removeStream(stream); }
      effectsMixer.addStream(stream);
    }
  }
</script>

Latest revision as of 14:47, 3 June 2012

Moved!

The latest version of the draft is now at [1].

Retrieved from "https://wiki.mozilla.org/index.php?title=MediaStreamAPI&oldid=437060"