HowToMeegoFennecDraft: Difference between revisions

From MozillaWiki
Jump to navigation Jump to search
mNo edit summary
Line 1: Line 1:
== What this is About  ==
== What this is About  ==


This document explains "How to build Mobile Firefox for Meego Netbook Platform".
This document explains "How to build Mobile Firefox for Meego Netbook Platform".<br>  
 
<br>


== Versions  ==
== Versions  ==
Line 11: Line 9:
== Current State  ==
== Current State  ==


Configuration successful, Build successful. Run successful with flash support in software mode.
Configuration successful, Build successful. Run successful with flash support in software mode.  


== Known Issues  ==
== Known Issues  ==
=== Crash on Start ===
Issues with Mesa Drivers. Starting in EGL accelerated version does not work. Fennec is crashing with:


<pre>
=== Crash on Start  ===
Mesa 7.9 implementation error: glIndexPointer should be mapped to 336, not 314
 
Issues with Mesa Drivers. Starting in EGL accelerated version does not work. Fennec is crashing with:
<pre>Mesa 7.9 implementation error: glIndexPointer should be mapped to 336, not 314
Please report at bugzilla.freedesktop.org
Please report at bugzilla.freedesktop.org
Mesa 7.9 implementation error: glUniformMatrix4fv should be mapped to 337, not 485
Mesa 7.9 implementation error: glUniformMatrix4fv should be mapped to 337, not 485
Please report at bugzilla.freedesktop.org
Please report at bugzilla.freedesktop.org
</pre>
</pre>  
Solution: Disable hardware acceleration within mobile.js


Solution:
=== Multitouch  ===
Disable hardware acceleration within mobile.js


=== Multitouch ===
Multitouch is not working in meego.com release TBI  
Multitouch is not working in meego.com release TBI


=== Flash Renderspeed ===
=== Flash Renderspeed ===
For some people the Renderspeed with native is really slow, it seems to get better when using this for starting fennec:


<pre> MOZ_QT_GRAPHICSSYSTEM=meego ./fennec -graphicssystem meego </pre>
For some people the Renderspeed with native is really slow, it seems to get better when using this for starting fennec:
<pre> MOZ_QT_GRAPHICSSYSTEM=meego ./fennec -graphicssystem meego </pre>  
== Setup your Netbook  ==


== Setup your Netbook ==
I use a Lenovo Ideapad S10-3t supporting multitouch. This is the recommended target device of Intel. [http://meego.com/devices/netbook/installing-meego-your-netbook Follow Instructions]  
I use a Lenovo Ideapad S10-3t supporting multitouch. This is the recommended target device of Intel.
[http://meego.com/devices/netbook/installing-meego-your-netbook Follow Instructions]
== Steps  ==


#Get MeegoSDK<br>Follow the steps from the [http://wiki.meego.com/SDK/Docs/1.1/Getting_started_with_the_MeeGo_SDK_for_Linux official Meego Website]. '''Stop at the point "Install MeeGo Runtime"''', we will continue from this point on.&nbsp;<br>
== Presteps, Install the SDK on your System<br> ==
#Download and install the [http://wiki.meego.com/SDK/Docs/1.1/Configuring_QEMU_runtimes Runtime]<br><pre>sudo mad-admin create -f -e meego-netbook-ia32-qemu-1.1.20101031.2037-sda-runtime</pre> <br>
#Mount the SDK<br>It is important to know that it is not a good idea to use Qemu and the Meego SDK. This is because of:<br>a) In case Qemu crash once, you can not start it again, everything is gone.<br>b) Qemu is very slow on compiling<br>c) For mounting working directories into Qemu you need to use nfs which is possible but increase complexity<br>d) The Image Partitions for netbook and handset are just to small in order to hold the mozilla sources<br><br>Steps:<br>1. Create mount point on your HOST Storage wherever you like it best<br><pre>sudo mkdir ~/meegoSDK </pre> 2. Create a working directory on your HOST Storage whereever you like it best<br><pre>sudo mkdir ~/meegoWorkingDirectory</pre>3. Mount the SDK Image into your Host System<br><pre>sudo mount -o loop,offset=512 /usr/lib/madde/linux-i686/runtimes/meego-netbook-ia32-qemu-1.1.20101031.2037-sda-runtime/meego-netbook-ia32-qemu-1.1.20101031.2037-sda.raw ~/meegoSDK </pre>4. Create a mount point within the meegoSDK Directory<br><pre>sudo mkdir ~/meegoSDK/meegoWorkingDirectory</pre> 5. Bind Mount your external Working Directory into the SDK Working Directory<br><pre>sudo mount --bind ~/meegoWorkingDirectory ~/meegoSDK/meegoWorkingDirectory</pre>
#ChangeRoot into MeegoSDK<br>1. Copy the changeroot script from this page (see section "Scripts"<br> 2. Use this script by calling<br><pre>sudo sdk-changeroot ~/meegoSDK</pre>
#Download and install dependencies / needed packages<br><pre>zypper in python-devel docutils libidl-devel libcontentaction-devel alsa-lib-devel gst-plugins-base-devel libXext-devel git doxygen libXrender-devel freetype-devel fontconfig-devel glib2-static libXt-devel libffi-devel python sharutils bc quilt yasm zip wget</pre>
#Get and Compile Mercurial<br>MeegoSDK is missing Mercurial packages, we need to download, compile and install them by our own.<br><pre>cd /meegoWorkingDirectory</pre><pre>wget http://mercurial.selenic.com/release/mercurial-1.7.3.tar.gz </pre><pre>tar -xzf mercurial-1.7.3.tar.gz </pre> <pre>cd mercurial-1.7.3 </pre><pre>make install</pre> <pre>echo "[extensions] hgext.mq=" &gt;&gt; ~/.hgrc</pre>
#Get and Compile autoconf2.13<pre>wget http://ftp.gnu.org/gnu/autoconf/autoconf-2.13.tar.gz</pre><pre>tar -xvzf autoconf-2.13.tar.gz</pre><pre>cd autoconf-2.13/</pre><pre>./configure --program-suffix=2.13</pre><pre>make</pre><pre>sudo make install</pre>
#Get and Compile libresourceqt <pre>git clone git://gitorious.org/maemo-multimedia/libresourceqt.git</pre><pre>qmake</pre><pre>make</pre><pre>make install</pre>
#Get Xulrunner Sources from Meego Developer Preview Repository<br><pre>cd /meegoWorkingDirectory </pre><pre>hg clone http://hg.mozilla.org/mozilla-central</pre> <pre>cd mozilla-central</pre><pre>hg clone http://hg.mozilla.org/mobile-browser mobile</pre><pre>cd mobile/.hg</pre> Get patchsets <pre>hg clone http://hg.mozilla.org/users/romaxa_gmail.com/workbase_prc2 patches</pre> <pre>cd patches</pre> <pre>hg update -C mobile-browser</pre> <pre>cd ../../../.hg/</pre> <pre>hg clone http://hg.mozilla.org/users/romaxa_gmail.com/workbase_prc2 patches </pre><pre>cd ../</pre> Apply patches using mqueue <pre>hg qpush --all</pre> <pre>cd mobile</pre> <pre>hg qpush --all</pre><pre>cd ..</pre>
#Copy mozconfig from this page into the /meegoWorkingDirectory
#Compile<br>The checkout there is still debian based, this needs to be adjusted. For now it's good enough to use the mozconfig provided in the bottom of this page.<br><pre>mkdir ./build-tree</pre><pre>make -f client.mk build</pre>
#Package it<br><pre>cd build-tree/obj-qt-buildxulrunner/xulrunner</pre><br><pre>make package</pre>
#Copy it to your device<br>Find the fennec*tar* within your build-tree/obj-qt-buildxulrunner/xulrunner directory<pre>scp fennec-#####.en-US.linux-i686.tar.bz2 &lt;user&gt;@IPTOYOURMEEGONETBOOK:/home/&lt;user&gt;</pre><br>
#Extract it
#Run it


<br>
Add the package respository of the SDK to your system: [http://wiki.meego.com/SDK/Docs/1.1/Getting_started_with_the_MeeGo_SDK_for_Linux#Configuring_distributions_package_manager (see source for more)]<br>  


= Scripts<br> =
==== On Ubuntu or Debian ====


== The SDK-Change-Root-Script  ==
<!-- Replaced '#' with <li> so that multi-line <pre> statements would appear in a single block -->
<pre># Copyright 2010, Intel Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Library General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.


# Authors:
#Add the following line to <code>/etc/apt/sources.list.d/meego-sdk.list</code>.<br> Replace ${distribution}/${version} with one of the following: "debian/5.0", "ubuntu/09.10", "ubuntu/10.04" or "ubuntu/10.10". <pre>deb http://repo.meego.com/MeeGo/sdk/host/repos/${distribution}/${version}/ / </pre>
# Haitao Feng &lt;haitao.feng@intel.com&gt;
#Add the repository public key: <pre>$ gpg --keyserver pgpkeys.mit.edu --recv 0BC7BEC479FC1F8A</pre><pre>$ gpg --export --armor 0BC7BEC479FC1F8A | sudo apt-key add -</pre>
# Jackie Wu &lt;jackie.wu@intel.com&gt;
#Update the packages database: <pre>$ sudo apt-get update</pre>
#To check that the MeeGo repository has been correctly added, run the following command. The details of the MADDE package should be printed. <pre>$ apt-cache policy madde</pre>


CHROOT_NAME=$0
*Install <pre>$ sudo apt-get install meego-sdk</pre>


usage()
==== On openSUSE  ====
{
echo Usage: "$CHROOT_NAME NEWROOT [COMMAND [ARG]...]"
echo " or: $CHROOT_NAME OPTION"
echo "Run COMMAND with root directory set to NEWROOT."
echo
echo " OPTIONS:"
echo " --help display this help and exit"
echo
echo "If no command is given, run ``${SHELL} -i''"
}


reference_increase()
*To add the MeeGo repository, run the following command. <br> Replace ${distribution}/${version} with one of the following values: "opensuse/11.2" or "opensuse/11.3". <pre>$ sudo zypper addrepo -f http://repo.meego.com/MeeGo/sdk/host/repos/${distribution}/${version}/meego-sdk.repo</pre>
{
if [ -f $1 ]; then
count=`cat $1`
if [ "X$count"&nbsp;!= "X" ]; then
count=`expr $count + 1`
echo $count &gt; $1
fi
fi
}


reference_decrease()
*Install <pre>$ sudo zypper install meego-sdk</pre>
{
if [ -f $1 ]; then
count=`cat $1`
if [ "X$count"&nbsp;!= "X" ] &amp;&amp; [ $count -gt 0 ]; then
count=`expr $count - 1`
echo $count &gt; $1
fi
fi
}


reference_print()
== Configure SDK  ==
{
if [ -f $1 ]; then
count=`cat $1`
if [ "X$count"&nbsp;!= "X" ]; then
echo "The reference count of [$1]: $count"
fi
fi
}


setup()
Download the mozilla-meego-assistant script from this website.
{
chroot=$1
# normal preparation for chroot
echo mount --bind /proc $chroot/proc
mount --bind /proc $chroot/proc
echo mount --bind /sys $chroot/sys
mount --bind /sys $chroot/sys
echo mount --bind /dev $chroot/dev
mount --bind /dev $chroot/dev
echo mount --bind /dev/pts $chroot/dev/pts
mount --bind /dev/pts $chroot/dev/pts


# preparation for X
#untar the tarball
# X sockets are at /tmp/.X11-unix
#<pre>sudo ./meego-assistant install</pre>
# echo mount --bind /tmp $chroot/tmp
# mount --bind /tmp $chroot/tmp


# preparation for dbus
== Steps  ==
# echo mount --bind /var/lib/dbus $chroot/var/lib/dbus
# mount --bind /var/lib/dbus $chroot/var/lib/dbus
# echo mount --bind /var/run/dbus $chroot/var/run/dbus
# mount --bind /var/run/dbus $chroot/var/run/dbus
 
# preparation for network
echo cp /etc/resolv.conf $chroot/etc/resolv.conf
cp /etc/resolv.conf $chroot/etc/resolv.conf
}
 
cleanup()
{
chroot=$1
#clean up processes using chroot
pid_set=$( ps ax | awk '{ print $1 }')
for pid in $pid_set
do
if [ -h /proc/$pid/root ]; then
ps=$( ls -l /proc/$pid/root 2&gt;/dev/null | grep $chroot)
if [ "X$ps"&nbsp;!= "X" ]; then
kill $pid
fi
fi
done
 
sleep 3
 
# umount directories
echo umount $chroot/proc
umount $chroot/proc
echo umount $chroot/sys
umount $chroot/sys
echo umount $chroot/dev/pts
umount $chroot/dev/pts
echo umount $chroot/dev
umount $chroot/dev
 
echo umount $chroot/tmp
umount $chroot/tmp
 
echo umount $chroot/var/lib/dbus
umount $chroot/var/lib/dbus
echo umount $chroot/var/run/dbus
umount $chroot/var/run/dbus
}
 
if test "x$1" = "x"
then
echo "$CHROOT_NAME: missing operand";
echo "Try '$CHROOT_NAME --help' for more information";
exit;
fi
 
if [ -e $1 ]; then
CHROOT=$(readlink -f $1)
if [ -e $CHROOT/proc ] &amp;&amp; [ -e $CHROOT/sys ] &amp;&amp; [ -e $CHROOT/dev ] &amp;&amp; [ -e $CHROOT/dev/pts ]; then
chroot_reference_count=`echo $CHROOT | sed 's/\//_/g'`
chroot_reference_count=/tmp/meego_chroot$chroot_reference_count.ref_count
chroot_mount=$( mount | grep $CHROOT/proc )
if [ "X$chroot_mount" = "X" ]; then
touch $chroot_reference_count
echo 0 &gt; $chroot_reference_count
reference_increase $chroot_reference_count


setup $CHROOT
#<pre>sudo ./meego-assistant login</pre>On first start this actually does the final configuration of the Image. Like downloading basic build dependencies, installing mercurial and autoconf2.13.
else
#Get Mozilla Sources and apply Meego Developer Patches on it<br>
if [ "x$2"&nbsp;!= "x" ]; then
if [ $2 = "force-clean" ]; then
echo "$CHROOT_NAME: clean up meego chroot $CHROOT"
cleanup $CHROOT
exit;
fi
fi
reference_increase $chroot_reference_count
fi


#patch from Graham Cobb, see bug #3156 for detail
<pre>cd /meegoWorkingDirectory
unset DBUS_SESSION_BUS_ADDRESS
hg clone http://hg.mozilla.org/mozilla-central cd mozilla-central hg clone http://hg.mozilla.org/mobile-browser mobile cd mobile/.hg hg clone http://hg.mozilla.org/users/romaxa_gmail.com/workbase_prc2 patches cd patches hg update -C mobile-browser cd ../../../.hg/ hg clone http://hg.mozilla.org/users/romaxa_gmail.com/workbase_prc2 patches cd ../ hg qpush --all cd mobile hg qpush --all cd .. wget [THIS&nbsp;MOZCONFIG] make -f client.mk build &lt;span style="font-family: sans-serif;" /&gt;
 
export HOME=/root
export PWD=/root
export CHROOTFROM=$CHROOT
export DISPLAY=:0.0
 
#perform the command in chroot
chroot $@
 
reference_decrease $chroot_reference_count
count=`cat $chroot_reference_count`
if [ "X$count"&nbsp;!= "X" ] &amp;&amp; [ $count -eq 0 ]; then
cleanup $CHROOT
else
echo "$CHROOT_NAME: warning: The housekeeping is not done. There might be other meego-chroot running."
fi
else
echo "$CHROOT_NAME: invalid meego chroot directory: $CHROOT";
exit;
fi
else
if [ $1 = "--help" ]; then
usage;
else
echo "$CHROOT_NAME: invalid meego chroot directory: $CHROOT";
echo "Try '$CHROOT_NAME --help' for more information";
fi
fi
</pre>
</pre>


== MOZCONFIG, i386 Build ==
MOZCONFIG, i386 Build  
<pre>
<pre>export LDFLAGS="-Wl,--no-keep-memory,-rpath-link,$PWD/dist/bin/:/usr/lib:/lib"
 
export LDFLAGS="-Wl,--no-keep-memory,-rpath-link,$PWD/dist/bin/:/usr/lib:/lib"
export LD_LIBRARY_PATH="/lib:/usr/lib:/usr/local/lib:/usr/X11R6/lib"
export LD_LIBRARY_PATH="/lib:/usr/lib:/usr/local/lib:/usr/X11R6/lib"


Line 262: Line 79:
mk_add_options MOZ_BUILD_PROJECTS="xulrunner mobile"
mk_add_options MOZ_BUILD_PROJECTS="xulrunner mobile"
mk_add_options AUTOCONF=autoconf2.13
mk_add_options AUTOCONF=autoconf2.13
mk_add_options MOZ_MAKE_FLAGS=-j5    
mk_add_options MOZ_MAKE_FLAGS=-j9    
   
   
# XULRunner options
# XULRunner options
Line 270: Line 87:
# Mobile options
# Mobile options
ac_add_app_options mobile --enable-application=mobile
ac_add_app_options mobile --enable-application=mobile
ac_add_app_options mobile --with-libxul-sdk=../xulrunner/dist


#Enable RTTI
#Enable RTTI
Line 304: Line 120:




mk_add_options MOZ_OBJDIR=./build-tree/obj-qt-buildxulrunner
mk_add_options MOZ_OBJDIR=./obj-qt-buildxulrunner
mk_add_options MOZ_MAKE_FLAGS=
</pre>
 
<br>
</pre>

Revision as of 09:41, 13 January 2011

What this is About

This document explains "How to build Mobile Firefox for Meego Netbook Platform".

Versions

This is written for Meego 1.1 SDK. Target Device is the Lenovo Ideapad. Target Platform is the Intel Netbook Release.

Current State

Configuration successful, Build successful. Run successful with flash support in software mode.

Known Issues

Crash on Start

Issues with Mesa Drivers. Starting in EGL accelerated version does not work. Fennec is crashing with: 

Mesa 7.9 implementation error: glIndexPointer should be mapped to 336, not 314
Please report at bugzilla.freedesktop.org
Mesa 7.9 implementation error: glUniformMatrix4fv should be mapped to 337, not 485
Please report at bugzilla.freedesktop.org

Solution: Disable hardware acceleration within mobile.js

Multitouch

Multitouch is not working in meego.com release TBI

Flash Renderspeed

For some people the Renderspeed with native is really slow, it seems to get better when using this for starting fennec: 

 MOZ_QT_GRAPHICSSYSTEM=meego ./fennec -graphicssystem meego

Setup your Netbook

I use a Lenovo Ideapad S10-3t supporting multitouch. This is the recommended target device of Intel. Follow Instructions

Presteps, Install the SDK on your System

Add the package respository of the SDK to your system: (see source for more)

On Ubuntu or Debian

  1. Add the following line to /etc/apt/sources.list.d/meego-sdk.list.
    Replace ${distribution}/${version} with one of the following: "debian/5.0", "ubuntu/09.10", "ubuntu/10.04" or "ubuntu/10.10". 
    deb http://repo.meego.com/MeeGo/sdk/host/repos/${distribution}/${version}/ /
  2. Add the repository public key: 
    $ gpg --keyserver pgpkeys.mit.edu --recv 0BC7BEC479FC1F8A
    $ gpg --export --armor 0BC7BEC479FC1F8A | sudo apt-key add -
  3. Update the packages database: 
    $ sudo apt-get update
  4. To check that the MeeGo repository has been correctly added, run the following command. The details of the MADDE package should be printed. 
    $ apt-cache policy madde
  • Install 
    $ sudo apt-get install meego-sdk

On openSUSE

  • To add the MeeGo repository, run the following command.
    Replace ${distribution}/${version} with one of the following values: "opensuse/11.2" or "opensuse/11.3". 
    $ sudo zypper addrepo -f http://repo.meego.com/MeeGo/sdk/host/repos/${distribution}/${version}/meego-sdk.repo
  • Install 
    $ sudo zypper install meego-sdk

Configure SDK

Download the mozilla-meego-assistant script from this website.

  1. untar the tarball
  2. sudo ./meego-assistant install

Steps

  1. sudo ./meego-assistant login
    On first start this actually does the final configuration of the Image. Like downloading basic build dependencies, installing mercurial and autoconf2.13.
  2. Get Mozilla Sources and apply Meego Developer Patches on it
cd /meegoWorkingDirectory 
hg clone http://hg.mozilla.org/mozilla-central cd mozilla-central hg clone http://hg.mozilla.org/mobile-browser mobile cd mobile/.hg hg clone http://hg.mozilla.org/users/romaxa_gmail.com/workbase_prc2 patches cd patches hg update -C mobile-browser cd ../../../.hg/ hg clone http://hg.mozilla.org/users/romaxa_gmail.com/workbase_prc2 patches cd ../ hg qpush --all cd mobile hg qpush --all cd .. wget [THIS MOZCONFIG] make -f client.mk build <span style="font-family: sans-serif;" />

MOZCONFIG, i386 Build 

export LDFLAGS="-Wl,--no-keep-memory,-rpath-link,$PWD/dist/bin/:/usr/lib:/lib"
export LD_LIBRARY_PATH="/lib:/usr/lib:/usr/local/lib:/usr/X11R6/lib"

# Options for client.mk.
mk_add_options MOZ_BUILD_PROJECTS="xulrunner mobile"
mk_add_options AUTOCONF=autoconf2.13
mk_add_options MOZ_MAKE_FLAGS=-j9   
 
# XULRunner options
ac_add_app_options xulrunner --enable-application=xulrunner
ac_add_app_options xulrunner --disable-javaxpcom

# Mobile options
ac_add_app_options mobile --enable-application=mobile

#Enable RTTI
ac_cv_visibility_pragma=no

# Global options
ac_add_options --enable-default-toolkit=cairo-qt 
ac_add_options --enable-faststart
ac_add_options --enable-printing
ac_add_options --enable-codesighs
ac_add_options --enable-system-ffi 
ac_add_options --enable-cpp-rtti
ac_add_options -prefix=/usr

ac_add_options --disable-necko-wifi
ac_add_options --disable-wave
ac_add_options --disable-optimize
ac_add_options --disable-installer
ac_add_options --disable-crashreporter
ac_add_options --disable-javaxpcom
ac_add_options --disable-embedding-tests
ac_add_options --disable-elf-dynstr-gc
ac_add_options --disable-updater
ac_add_options --disable-pedantic
ac_add_options --disable-elf-dynstr-gc 
ac_add_options --disable-install-strip 
ac_add_options --disable-jemalloc 
ac_add_options --disable-logging 
ac_add_options --disable-logrefcnt 
ac_add_options --disable-tests --disable-mochitest
ac_add_options --disable-accessibility
ac_add_options --disable-thumb2 # see bug 619481


mk_add_options MOZ_OBJDIR=./obj-qt-buildxulrunner


Retrieved from "https://wiki.mozilla.org/index.php?title=HowToMeegoFennecDraft&oldid=277500"