DHylands SGS2 SerialAdapter

From MozillaWiki
Revision as of 08:50, 28 April 2012 by Dhylands (talk | contribs) (Created page with "This page describes how to create a serial adapter which allows access to a serial port on the Samsung Galaxy S2. ==Parts Required== [http://www.sparkfun.com/products/10031 Spar...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This page describes how to create a serial adapter which allows access to a serial port on the Samsung Galaxy S2.

Parts Required

SparkFun BOB-10031 USB MicroB Plug Breakout Board
SparkFun DEV-10009 FTDI Basic Breakout - 3.3V
510K resistor
Some wire - I used some 90 degree headers.
SparkFun RTL-10424 USB Cable - A to mini B (connects PC to FTDI Adapter)

You need to connect 3 wires from the Micro USB connector to the FTDI adapter. D- connects to RXI
D+ connects to TXO
GND connects to GND

The 510K resistor connects between GND and the ID pin (on the Micro USB connector).

When I can upload some images, I'll add an image of my adapter.

Retrieved from "https://wiki.mozilla.org/index.php?title=DHylands_SGS2_SerialAdapter&oldid=425318"