ReleaseEngineering/Archive/Reboot A Panda Relay Board: Difference between revisions

Revision as of 18:02, 4 June 2015

If a Panda Relay Board fails to accept commands from mozpool but the web UI is still accessible, it can be reset remotely.

Log in to the web UI with the relay board username and password (found in the relops password file) eg. http://panda-relay-001.p127.releng.scl3.mozilla.com/

From the home page, click on the Reboot link under the Administration section on the left hand page. Then click the reboot button.

This will reset the relay controller chip and should reestablish communications.

Revision as of 17:58, 4 June 2015 (view source) Dividehex (talk \| contribs) (Initial reboot panda relay howto)		Revision as of 18:02, 4 June 2015 (view source) Dividehex (talk \| contribs) m (added {{Release Engineering How To\|... }} tag) Newer edit →
Line 1:		Line 1:
			{{Release Engineering How To\|Reboot A Panda Relay Board}}

	If a Panda Relay Board fails to accept commands from mozpool but the web UI is still accessible, it can be reset remotely.		If a Panda Relay Board fails to accept commands from mozpool but the web UI is still accessible, it can be reset remotely.